An interesting question came up the other day in the inbox, regarding surface embroidery on even-weave linens, or lower thread count linens sold primarily for cross stitch. Essentially, the reader wanted to know “Can it be done?”
To answer the question and make some qualifications, here’s a sneak peek of an upcoming project.
Surface embroidery can be done practically on anything. But when it comes to lower count linens made primarily for the cross stitch market, though you can definitely use them for surface embroidery, there are some considerations to keep in mind in order to achieve really good results with your embroidery.
The above embroidered sample is worked on a linen by Legacy called Atmosphere. (Love the name for the color!) It’s a 30 count linen, and you can see that the threads of the fabric have some separation between them.
This looser spacing between the warp and weft threads of the fabric is the problem spot when it comes to surface embroidery. It can be difficult to get a really smooth line or a smooth edge with surface embroidery when the ground fabric is not a tightly woven, higher thread count fabric.
The sample is stitched with coton a broder 25 and floche. Either one works well on the fabric.
There are a few things you can do to ensure good results with surface embroidery on similar fabrics.
First, there’s the needle consideration. A sharp needle – a crewel (also known as “embroidery”) needle with a sharp tip – is essential.
The reason for this is that you’ll have to split the threads of the linen ground as you stitch. Unlike cross stitch, where a tapestry needle is used precisely so that you don’t split the ground threads, in surface embroidery on this type of fabric, you must split the ground threads or you won’t achieve smooth lines and edges. A tapestry needle is too blunt to split the fabric threads, and will slide off them and slip into the nearest hole between them. This will take the lines or edges of your surface embroidery off course and make things look jagged.
Second, there’s the thread consideration. A single strand of cotton floss does not work as well for surface work on this type of fabric as several strands of cotton or as a heavier, non-divisible thread like coton a broder or floche does. If you are using a single strand, you’ll achieve better results if you have something to help the fabric “grip” the thread….
…which brings us to the third consideration: the possible use of a backing fabric. Especially if you’re working satin stitch or similar filling stitches that require a smooth edge, or if you’re using a single strand of regular cotton embroidery floss, backing the ground fabric with a high count, firmly woven cotton (like muslin or calico) will assure much better results with your surface embroidery.
On the sample above, I used a crewel needle (size 8), coton a broder (and a little bit of floche), and 30 count linen with no backing fabric. And everything worked out pretty well.
And the final difficulty – in fact, it’s probably the thing that bugs me most when using this type of fabric – is the design transfer. It’s frustratingly difficult to draw a clean, accurate line on this type of fabric. The bumpiness of the fabric bumps the pencil off course. The solution? Pull the pencil across the fabric surface at a very low angle to the surface, rather than trying to draw with the pencil upright. If the pencil is upright, the tip catches in the spaces between the fabric threads.
So, moral of the story (was there a story?) is: yes, you can use these types of fabrics for hand embroidery, but there are certain considerations to keep in mind when you do.
Of course, this opens up a Whole New Discussion: not all even-weave fabrics are created equal. But we’ll save that for another day!
If you like the look of Legacy’s atmosphere linen, you can find it at Needle in a Haystack. Just use their search feature in the catalog and type in “atmosphere”. Remember, though, that colors are different on computer monitors. On my computer, the last picture is the best representation of the color.
